Taking Care of Your Copier

FullSizeRender (3)

The copier is one of the most important machines in your office; it is used throughout the whole day and it is expected to run in top condition at all times. Like any machine (car, phone, or appliance) your copier needs some TLC and a good clean every once in a while. Keeping your copier clean will not only give you cleaner copies, it will also increase the lifespan of your machine by several years. Read on to learn some cleaning tips to keep your copier running well for years to come.


Step 1. Power Off. Before you start cleaning your machine, make sure to turn the copier off. This will prevent any electrical accidents and will keep you and your machine safe.

Step 2. Collect. Cleaning your copier requires specific types of products. Collect the following items: a microfiber cloth, cotton swabs, Windex, rubbing alcohol, and a can of air.

Step 3. Wipe. A clear and dust-free optic glass will produce better quality copies. To clean the glass of your copier use a microfiber cloth and some Windex. Never use paper towels as they can leave dust residue and particles on the glass. Only use a small amount of glass cleaner, because too much cleaner will leave streaks. Do not use water to clean the glass, as this will also leave streaks.

Step 4. Sanitize. With so many people touching the Control Panel everyday this is a huge spot for germs. Pour some rubbing alcohol onto a cloth and wipe down the Control Panel/Touch Screen area. Though it might be easier to use a wet towel or Clorox wipe, these options are not as sanitary or safe for the copier. Use the cloth and alcohol on the tray handles of the machine as well, and any other places that are often touched.

Step 5. Dust. Small particles in the machine can sometimes lead to poor copy quality and jamming. There are two ways to get the dust off of your machine. You can wipe the machine down with a microfiber cloth, but do not use any product to assist. For the back of the machine, paper tray corners, and in between the rollers, use a can of air. Once the particles surface, you can wipe them away with the cloth.

Step 6. Clean. An effective way to prevent jamming is to clean the copier rollers of dust, paper debris, and dirt. Start by getting out the dust in-between the rollers; use the can of air and a microfiber cloth. Make sure to get a full revolution of the rollers so that you collect as many dust particles as possible. Then, clean the rollers using rubbing alcohol on a cloth or using a cotton swab. Let the rollers dry before turning on the machine.

Step 7. Refresh. The paper trays on the copier are another place that need to be routinely cleaned. With that area storing paper, lots of particles and dirt can accumulate there. Remove the paper from the trays, blow out the dust with the can of air, and then fan out and replenish the paper. If the machine has not been used recently, refresh the paper with a new stack that is dust free.


 We suggest cleaning your machine monthly to quarterly.

**If there is a major issue, please place a service request so that our technicians can clean your machine properly.**

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s